Why is there no sound on my apple TV?

I’ve used the Apple TV for a long time now, and even as it streams video perfectly, I’ve confronted some audio problems, wherein the Apple TV audio cuts out each now and then. As a clever domestic nerd, I’m on a quest to construct the maximum handy Smart Home. To attain this goal, I’ve been seeking to get the maximum out of my Apple TV with the aid of getting it to paint with HomeKit and the use of AirPlay to reflect my iPhone onto it. All these paintings might be meaningless if there’s no audio coming from the tool. And so I set to painting. After hours of studies on help boards and technical articles, I’ve prepared a complete article on the difficulty. To restore your Apple TV having no sound, make sure you’ve decided on the proper speaker device and ensure Audio Mode is about to Auto. If no longer, visit Menu->Settings-> Audio and Video->Audio Format-> Change Format->New Format, transfer it to Stereo. I’ve additionally pointed out rebooting your hardware and checking for updates.

Apple TV No Sound: What does this mean?

The Apple TV is a flexible streaming unit that receives up to date pretty often and has definitely gotten a lot higher than it turned into on release. That being said, the Apple TV isn’t always impervious to audio troubles, even today. Every now and then, the audio from the Apple TV receives a reduction without caution. Whatever you do, once in a while the audio simply doesn’t paint at all. Yes, there can be situations wherein your outside speaker device or maybe your TV audio may be at fault. This does closely rely on the outside sound device you’re using and your TV audio. Even if it doesn’t, we’ll manual you through a few troubleshooting approaches to accurate the equal.

Steps to Fix No Sound Issue on Your Apple TV:

• STEP 1: Take your Apple TV far off and press Menu.
• STEP 2: From the window jack that looks to your display, scroll right all the way down to Settings and click on it.
• STEP 3: Inside the settings menu, click on the choice referred to as Audio and Video.
• STEP 4: Now, you’ll be taken to the Audio and Video settings menu. Here scroll down and pick the choice referred to as Audio Format.
• STEP 5: Click at the handiest to be had choice, Change Format.
• STEP 6: Now, your Apple TV software program will set off you with a window wherein you ought to pick Change Format again.
• STEP 7: You’ll be taken lower back to the preceding window. Here, scroll down and pick the choice New Format and transfer it to Stereo.
• STEP 8: Use your authentic TV far off and visit your TV’s Audio/Sound settings.
• STEP 9: Select the Audio OUT choice and set it to Optical.
• STEP 10: Make certain you pick the choice Digital Sound Out below Optical.

Still Unable to Fix No Sound Issue on Your Apple TV?

Troubleshooting Tips Other troubleshooting approaches that you could strive out consist of rebooting the entire Apple TV streaming device and any audio hardware linked to the Apple TV. Check and tighten all of the HDMI cord connections. Also, make certain that you’ve decided on the proper audio system within the Audio and Video settings choice within the Apple TV menu and ensure the Audio Mode is about to Auto (however a few TV’s do require sixteen bit). Moreover, it’s always better to apply the up to date software for Apple TV and consequently replace your device in case you haven’t carried it out yet. I’ve furnished an in depth account of ways every of those troubleshooting approaches may be positioned to apply below:

Rebooting the Apple TV device:

I’d advise you to reboot your Apple TV device from time to time. Rebooting is a powerful manner to restore a few minor technical problems that frequently would possibly arise on your device, particularly if the video you’re airplaying has no sound. This is due to the fact that on rebooting your Apple TV, the RAM gets cleared, thereby stopping your RAM from getting excessively clogged. Rebooting additionally guarantees that each one the packages jogging on your Apple TV device come to a halt, thereby giving your device a clean start. If you’re lucky, only a reboot would possibly restore the difficulty at stake right here. For rebooting– In your Apple TV far off, maintain the Menu button and the TV button concurrently for approximately six seconds. Ignore the sleep conversation that pops up on doing so. You’ll observe that the LED within the Apple TV tool begins off evolve blinking after the energy is going off. This shows that the device is rebooting. If you couldn’t connect with the tool, take a look at out right here.

Rebooting the hardware linked to the Apple TV device:

Sometimes, the audio troubles are an end result of the outside sound structures linked for your Apple TV. It may not be your Apple TV at fault. Hence, we advise you turn off and disconnect each outside audio hardware device linked to the Apple TV, watch for as a minimum 30 seconds to 1 minute earlier than you turn on, and reconnect them lower back for your Apple TV again.

Check and tighten all of the HDMI cable connections:

Audio troubles can frequently rise up additionally because of minor connection problems. We’d advise you take a look at and make certain all of the HDMI cable connections to say, your homekit soundbar or TV audio device is right and tight.

Ensuring you’ve assigned the proper sound device for your Apple TV device

You should ensure that your Apple TV identifies the proper speaker device linked to it as its Audio Output. These are a few approaches which might be frequently overlooked with the aid of using the customers and consequently are very important.

Let’s run through the stairs to do this:

• Step 1: Press the Menu button to your Apple TV far off.
• Step 2: From the menu that looks at the display (click on right here in case your foremost menu is blank), scroll down and pick Settings.
• Step 3: The Settings menu opens up. Scroll right all the way down to the Audio and Video choice and pick it.
• Step 4: From the brand new menu that looks on-display pick Audio Output and assign the proper sound device.

Check for updates:

Updates make your Apple TV device software program greater subtle and optimized. Your device receives higher and higher with every replace, and consequently it’s top exercise to replace your device as every replace rolls out. Often the maximum of the problems confronted with the aid of using the consumer are addressed with the aid of using the maximum current updates. These are the stairs to test for a replacement to your Apple TV.

• Step 1: Use your Apple TV far off and press the Menu button.
• Step 2: Go to Settings at the menu window and click on it.
• Step 3: Click on Software Updates and pick Update Software.
• Step 4: A conversation seems to your display if there are any to be had updates. Select Download and Install to begin the replace manner. Be affected and do now no longer disconnect your Apple TV even as the replace manner goes on.

Conclusion

As it turns out, the Apple TV’s audio problems aren’t a completely unusual mistake to arise. Its troubleshooting approaches also are particularly smooth and much less time-consuming. I desire that the statistics furnished in this text has helped you resolve the numerous audio problems you confronted. If you continue to discover your self-dealing with the same troubles again and again, I’d advise you to get in touch with certified providers.